$67.16 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 285422992295
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
ECCPP:ECCPP
Manufacturer Part Number:E80483901CP
Interchange Part Number:K6293 ES2004S ES2836RL ES2837RL K6292 K5252
Kit Included:12Pieces
Items Included:Mounting Hardware
Placement on Vehicle:Left, Right, Front
Surface Finish:Premium Quality
Kit Parts Included:Ball Joint Tie Rod End Adjusting Sleeve
Manufacturer Warranty:10 Year
Kit Parts Included(2):Tie Rod End Stabilizer Bar Link Kit
Cross Part Number:2648561, 265934, 32671, 349774, 3813C1, 381484, 5668674, 5668675
partslink-number:567625, 5676518, 789619, 78962, 7812118, 7826714, 7826716
Kit or Single Part:Kit
OE/OEM Part Number:645217, 928833, 1239226, 1474919, 155373, 1634619, 26339
Superseded Part Number:1557591, 15617715, 15634385, 1563494, 15659518, 156878, K637
Greasable or Sealed:Greasable
Country/Region of Manufacture:China
Bundle Listing:Yes
Adjustable:Yes
Universal Fitment:No
UPC:Does not apply
Store Speciality:Suspension and Steering
Cross Reference Part Number:1988,1989,1990,1991,1992
Fitment:For Chevrolet C1500 C2500 GMC C1500 C2500
Type:Sway Bar Link
Features:Greasable
Finish:Coated
Material:Alloy Steel
Mounting Style:Bolt-On
Cotter Pin Hole:Yes
eBay Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: 12pcs Front Tie Rod Ends Ball Joints For GMC Chevrolet C1500 C2500 1988-1992 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may «wander» as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Brand ECCPP Manufacturer Part Number E80483901CP Interchange Part Number K6293 ES2004S ES2836RL ES2837RL K6292 K5252 Kit Included 12Pieces Items Included Mounting Hardware Placement on Vehicle Left, Right, Front Surface Finish Premium Quality Kit Parts Included Ball Joint Tie Rod End Adjusting Sleeve Manufacturer Warranty 10 Year Kit Parts Included(2) Tie Rod End Stabilizer Bar Link Kit Cross Part Number 2648561, 265934, 32671, 349774, 3813C1, 381484, 5668674, 5668675 partslink-number 567625, 5676518, 789619, 78962, 7812118, 7826714, 7826716 Kit or Single Part Kit OE/OEM Part Number 645217, 928833, 1239226, 1474919, 155373, 1634619, 26339 Superseded Part Number 1557591, 15617715, 15634385, 1563494, 15659518, 156878, K637 Greasable or Sealed Greasable Country/Region of Manufacture China Bundle Listing Yes Adjustable Yes Universal Fitment No Store Speciality Suspension and Steering Cross Reference Part Number 1988,1989,1990,1991,1992 Fitment For Chevrolet C1500 C2500 GMC C1500 C2500 Fitment For Chevrolet C1500 C2500 GMC C1500 C2500 Type Sway Bar Link Features Greasable Finish Coated Material Alloy Steel Mounting Style Bolt-On Cotter Pin Hole Yes Item Specifics Brand ECCPP Manufacturer Part Number E80483901CP Interchange Part Number K6293 ES2004S ES2836RL ES2837RL K6292 K5252 Kit Included 12Pieces Items Included Mounting Hardware Placement on Vehicle Left, Right, Front Surface Finish Premium Quality Kit Parts Included Ball Joint Tie Rod End Adjusting Sleeve Manufacturer Warranty 10 Year Kit Parts Included(2) Tie Rod End Stabilizer Bar Link Kit Cross Part Number 2648561, 265934, 32671, 349774, 3813C1, 381484, 5668674, 5668675 partslink-number 567625, 5676518, 789619, 78962, 7812118, 7826714, 7826716 Kit or Single Part Kit OE/OEM Part Number 645217, 928833, 1239226, 1474919, 155373, 1634619, 26339 Superseded Part Number 1557591, 15617715, 15634385, 1563494, 15659518, 156878, K637 Greasable or Sealed Greasable Country/Region of Manufacture China Bundle Listing Yes Adjustable Yes Universal Fitment No Store Speciality Suspension and Steering Cross Reference Part Number 1988,1989,1990,1991,1992 Fitment For Chevrolet C1500 C2500 GMC C1500 C2500 Fitment For Chevrolet C1500 C2500 GMC C1500 C2500 Type Sway Bar Link Features Greasable Finish Coated Material Alloy Steel Mounting Style Bolt-On Cotter Pin Hole Yes Discount Targeted Disounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means ECCPPAUTOPARTS won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales Universal 12V Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 16.49 Front Wheel Hub Bearing For Chevy Monte Carlo Impala Cadillac Eldorado DTS FWD USD 40.38 ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD USD 60.95 2 For Ford F150 Excursion Ranger 1998 1999 2000-2010 Remote Keyless Entry System USD 7.29 Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors USD 107.99 Newly Listed 3pcs Upstream & Downstream Oxygen Sensor O2 for 2001 Dodge Ram 3500 5.9L 8.0L USD 37.69 Power Door Lock Actuator Window Regulator For Honda Accord Rear+Left 746-367 USD 40.09 Front Lower Ball Joints Steering Sway Bar Tie Rod End For 1997-2004 Buick Regal USD 54.49 Front Steering Sway Bar Tie Rod End Rack Pinion Bellow For 95-1999 Nissan Maxima USD 46.29 8set Fits 1998-2001 Subaru Impreza Front Rear Sway Bars Tie Rods Ball Joints USD 60.41 12pcs Front Tie Rod Ends Ball Joints For GMC Chevrolet C1500 C2500 1988-1992 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may «wander» as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Brand : ECCPP Manufacturer Part Number : E80483901CP Interchange Part Number : K6293 ES2004S ES2836RL ES2837RL K6292 K5252 Kit Included : 12Pieces Items Included : Mounting Hardware Placement on Vehicle : Left, Right, Front Surface Finish : Premium Quality Kit Parts Included : Ball Joint Tie Rod End Adjusting Sleeve Manufacturer Warranty : 10 Year Kit Parts Included(2) : Tie Rod End Stabilizer Bar Link Kit Cross Part Number : 2648561, 265934, 32671, 349774, 3813C1, 381484, 5668674, 5668675 partslink-number : 567625, 5676518, 789619, 78962, 7812118, 7826714, 7826716 Kit or Single Part : Kit OE/OEM Part Number : 645217, 928833, 1239226, 1474919, 155373, 1634619, 26339 Superseded Part Number : 1557591, 15617715, 15634385, 1563494, 15659518, 156878, K637 Greasable or Sealed : Greasable Country/Region of Manufacture : China Bundle Listing : Yes Adjustable : Yes Universal Fitment : No Store Speciality : Suspension and Steering Cross Reference Part Number : 1988,1989,1990,1991,1992 Fitment : For Chevrolet C1500 C2500 GMC C1500 C2500 Fitment : For Chevrolet C1500 C2500 GMC C1500 C2500 Type : Sway Bar Link Features : Greasable Finish : Coated Material : Alloy Steel Mounting Style : Bolt-On Cotter Pin Hole : Yes Item Specifics Brand ECCPP Manufacturer Part Number E80483901CP Interchange Part Number K6293 ES2004S ES2836RL ES2837RL K6292 K5252 Kit Included 12Pieces Items Included Mounting Hardware Placement on Vehicle Left, Right, Front Surface Finish Premium Quality Kit Parts Included Ball Joint Tie Rod End Adjusting Sleeve Manufacturer Warranty 10 Year Kit Parts Included(2) Tie Rod End Stabilizer Bar Link Kit Cross Part Number 2648561, 265934, 32671, 349774, 3813C1, 381484, 5668674, 5668675 partslink-number 567625, 5676518, 789619, 78962, 7812118, 7826714, 7826716 Kit or Single Part Kit OE/OEM Part Number 645217, 928833, 1239226, 1474919, 155373, 1634619, 26339 Superseded Part Number 1557591, 15617715, 15634385, 1563494, 15659518, 156878, K637 Greasable or Sealed Greasable Country/Region of Manufacture China Bundle Listing Yes Adjustable Yes Universal Fitment No Store Speciality Suspension and Steering Cross Reference Part Number 1988,1989,1990,1991,1992 Fitment For Chevrolet C1500 C2500 GMC C1500 C2500 Fitment For Chevrolet C1500 C2500 GMC C1500 C2500 Type Sway Bar Link Features Greasable Finish Coated Material Alloy Steel Mounting Style Bolt-On Cotter Pin Hole Yes DiscountShippingWarrantyReturnFeedback Targeted Disounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means ECCPPAUTOPARTS won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests. (6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of ECCPP. All rights reserved.
Frequently Asked Questions About 12pcs Front Tie Rod Ends Ball Joints For GMC Chevrolet C1500 C2500 1988-1992 in My Website
quediade.com is the best online shopping platform where you can buy 12pcs Front Tie Rod Ends Ball Joints For GMC Chevrolet C1500 C2500 1988-1992 from renowned brand(s). quediade.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling 12pcs Front Tie Rod Ends Ball Joints For GMC Chevrolet C1500 C2500 1988-1992 on quediade.com?
quediade.com helps you to shop online and delivers Rayban to your doorstep. The best-selling Rayban on quediade.com are: Ray Ban 601/9A Black WRAP Gray Polarized Sunglasses Italy Ray Ban RB 4181 Polarized Sunglasses, 710/83 Havana / Brown (BAD LENSES) #G06 RAY BAN RB8313 001 51 Gold Arista Men’s 58 mm Sunglasses Brand New Sealed Ray-Ban RB 4440-N-F Blaze Wayfarer in Blue Violet Gradient Lens NEW Ray Ban Polished Black POLARIZED Gray Green Lens Sunglass RB 3516 006/9A Ray Ban Sunglasses Classic Wayfarer RB2151 Brown Made In Italy NEW* Ray Ban AVIATOR SILVER 64mm w Brown Purple Gradient Sunglass RB 3387 003 Ray-Ban Sunglasses RB3023 Highstreet MSW W3132 Brown Oval Frames Only 55[]00 3N RAY BAN RB3016 133751 Pink Havana Unisex 49 mm Sunglasses Ray-Ban RB2132 New Wayfarer Square Polarized Sunglasses Black With Divots Ray-Ban Sunglasses RB3025 Aviator Classic Gold Frame Polarized Brown Lens 58mm Ray-Ban Gatsby I RB4256 Round Sunglasses 6092/55 Havana Brown Blue Mirror Lens Ray Ban Italy RB4640 601/31 50[]20 Black Sunglasses “ READ” Sunglasses Ray Ban AVIATOR; Light GRAY GRADIENT Lens: RB3025; Size 58 standard Ray-Ban Wayfarer Black On Yellow /Light Gray Lens Discounted Model 2140 1000/32 RAY BAN RB3721CH 9144A1 Black Blue Mirror Polarized Men’s 59 mm Sunglasses Ray Ban Polarized Sunglasses Only Worn Once used rb3721ch RAY BAN RB3016F W0366 Tortoise on Arista Square 55 mm Unisex Sunglasses RAY BAN RB3016 114517 Sand Havana on Arista Square 51 mm Unisex Sunglasses Ray Ban RB 4078 642 Brown Striped Rectangle Sunglasses Frames Italy Designer Ray-Ban Titanium Chromance RB8062 Sunglasses Arista Gold w/ Polarized Blue Ray-Ban Caribbean Sunglasses Striped Grey w/ Dark Grey Lenses RB2248 Ray-Ban New Wayfarer Matte Black Rubber l Green G-15XLT RB2132 622 58mm Ray-Ban Boyfriend Reverse Sunglasses RB R0501S Polished Black Green Tint w/case Ray Ban Sunglasses Frames RB3293 004/9A 67-13 3P Nice RAY BAN RBR0502S 6707GR Transparent Dark Grey Unisex 53 mm Sunglasses RAY-BAN RB3273 Mens Aviator Sunglasses Polarized Lenses Clamshell Hard Case Ray Ban RB 4184 Black Sunglasses Ray-Ban AVIATOR RB3025 112/4L MATTE GOLD W/ 58-14 58mm BLUE MIRROR POLARIZED D78 Ray-Ban RB 4057 601 3N Sunglasses Mens Black Full Frame 15156 RAY BAN RB4165 651287 Transparent Dark Grey Men’s 55 mm Sunglasses Ray-ban RB4331 601 S 80 Black Mens Rectangle Sunglasses 59-17 3N “ READ” RAY BAN RB2132 865 B1 Rubber Havana Dark Grey Unisex 58 mm Sunglasses RAY BAN RB3016F W0365 Black on Arista Square 55 mm Unisex Sunglasses New Ray-Ban Round Gray Gunmetal Green Mirror Sunglasses RB4243 6262B4 49 $153 Ray-Ban Gatsby II RB4257 Round Sunglasses 601/71 Black Gold Frame Green Lens 50 [RB4188-600/783_63] Mens Ray-Ban Rectangle Polarized Sunglasses Ray-Ban RB3527 Sunglasses 029/9A Matte Gunmetal Frame Green Polarized Lens 61mm Sunglasses Ray Ban CLUBMASTER RB3016 / SILVER MIRRORED Lens / Standard Size Ray-Ban RB4171 Black Matte/ Mirrored Erika Sunglasses RAY-BAN Sunglasses RB4162 601/32 Polished Black/Gray Aviator NEW Italy RAY-BAN RB3387 POLARIZED Sunglasses 002/9A Black/Green Gray NEW Aviator 🔥 Ray-Ban RB3549 POLARIZED Sunglasses | 006/9A – Black / Classic G-15 Lens $188 Vintage RAY BAN B&L Sunglasses PREDATOR CATS Black Plastic Frame Ray-Ban RB3717 002/B1 57-18, Polished Black Frame, Dark Grey Lens, NEW! RAY BAN RB 8301 Aviator Sunglasses 61 14 140 Made In Italy Ray Ban Justin Rb4165 622/T3 Black Rubber Matte Sunglasses Frame Only RAY-BAN CATS 4000 SUNGLASSES LIGHT HAVANA / CRYSTAL BROWN GRADIENT RB4128 710/51 Open Box Ray-Ban 0RB4428 Sunglasses, Havana Frame, Blue Lens RAY BAN RB2210 901 58 Black Green Polarized Unisex 53 mm Sunglasses Ray-Ban RB3576N 043/71 Blaze Polished Gold Frame With Dark Green Lenses Ray-Ban New Aviator Sunglasses RB 3625 002/B1 Polished Black Metal 62mm w/case Ray Ban Sunglasses Blaze Shooter RB3581N 1537V Demi gloss Black 32mm Blue Lens Ray Ban RB3447 001 ROUND METAL Gold/ Green Classic G-15 AUTHENTIC ITALY Ray-Ban RB2027 Black l Polarized Mirror Grey RB2027 601/W1 62mm Ray-Ban Wayfarer Folding Classic RB4105 601 50 Ray-Ban Original Wayfarer Style Classic Sunglasses – Black 2140 Aftermarket Silicone RayBan Replacement Temple (Arm) Tips BROWN 3217 Ray Ban Ray Ban RB R0101S Ray-Ban Aviator Reverse 001/VR 62011 145 3N Italy Ray-Ban Aviator Classic Gold Framed Sunglasses Great Used Condition Ray-Ban Sunglasses RB4395 Kiliane 667771 Black green Man Woman [RB3293-001/13_63] Mens Ray-Ban Aviator Sunglasses Ray-Ban Boyfriend Reverse Brown Transparent Sunglasses RBR0501S 6709CB 56 Ray Ban Sunglasses Frames RB 4107 601/58 Rectangle Black Sunglasses Italy 3P RAY BAN Clubround Classic Sunglasses 51-19 Tortoise Black Unisex w Case Ray Ban RB3447 112/Z2 ROUND FLASH LENSES Copper Flash lenses; Gold AUTHENTIC NEW Men’s Ray-Ban Sunglasses RB4331 710/73 Havana brown, FREE SHIPPING Ray-Ban Sunglasses RB 3254 Pilot Black Full-Rim With Case Frames Only New Ray Ban Sunglasses 3016 W0365 Clubmaster Black and Gold G-15 Lens 51mm Ray Ban RB2447 1159/4E Round Fleck Black Havena Unisex Italy W/ Case Rayban RB3588 55 19 140 Sunglasses 9014/80 3N READ DESCRIPTION Ray Ban RB4089 Balorama Sunglasses Polarized Ray Ban rb3162 006 Sleek Black Metal Sunglasses Frame Only 52-19 NO LENSES Ray-Ban Sunglasses RB3016 Clubmaster Classic Black Frame Green Lens 49mm Unisex Ray-Ban RB3664CH Chromance Square Sunglasses Light Brown w/ Brown Rayban Mens Sunglasses RB4184 Black Gray Ray-Ban Sunglasses RB 4194 601-53-17 Unisex Black Plastic Frames Ray-Ban Olympian Aviator Sunglasses Gray Gradient Havana Green Lens Case Cloth Ray-Ban Sunglasses Junior RJ9548SN Ray-Bans Black New Wayfarar Polarized Sunglasses 😎 Ray Ban RB3198 014/83 Sleek Brown Wrap Polarized Sunglasses 55-18 Read RAY-BAN RB 4387 601/71 BLACK AUTHENTIC FRAMES SUNGLASSES 56-18 Rayban RB3689 Aviator Sunglasses 001/GE Gold Frame Blue To Peach Gradient 62mm Ray-Ban Mega Wayfarer Sunglasses RB 0840S Polished Transparent Dark Gray w/case Ray-Ban Sunglasses RB4416 NEW CLUBMASTER 601/31 Black Gold Frames G-15 Lenses Ray-Ban RB 3364 014 Brown / Tortoise Wrap Sunglasses 59[]17 MADE IN ITALY Ray-Ban RB3025 019/W3 Aviator Sunglasses Matte Silver / Polarized Silver Mirror Aftermarket Silicone RayBan Replacement Temple/Arm Tips RB 3506 BROWN Ray Ban Ray-Ban RB 3490 Brown Copper Sunglasses Dark Brown Lens 62-16-140 Italy Eyewear Ray Ban RB3025 AVIATOR 58mm Blue Flash POLARIZED/Silver AUTHENTIC ITALY Ray-Ban Aviator Reverse Gold Frame, Green Lens Sunglasses RBR0101S 001/82 59 Pre-Owned Ray-Ban RB3447 112/17 Round Metal Gold Frame / Blue Mirrored Lenses Ray-Ban RB3025 002/58 Black Aviator Green Classic Polarized 58mm Sunglasses Ray Ban Italy RB 4285 710/14 55-20-140 3N Tortoise/Brown Sunglasses Frame UY81 Men’s Rayban Sunglasses | Used Condition Dark Blue Made In Italy RAY BAN ANDREA BLACK SUNGLASSES WITH DARK BLUE LENSES AVIATION RB3595 901480 Ray-Ban RB3119 001 Olympian Gold/Green G15 Men’s Sport Sunglasses Sizes 59 & 62 Ray-Ban Boyfriend Light Grey Lens Black Frame Unisex Sunglasses RB4147 601/32-60 Ray-Ban Classic Aviators RB3025 Total Silver Sunglasses (Open Box, Never Used) Sunglasses 2132 Ray Ban NEW WAYFARER / CLASSIC Lens / Standard Size Mens Pullover Fleece Hoodie